COPPER PASTE is a high temperature anti-seize lubricant. A soft - copper-coloured paste based on micronised copper powder and synergistic anti-oxidant - anti-corrosion and anti-wear additives suspended in a premium grade stable oil. It is an effective anti-seize formulation preventing:

• Metal-to-metal contact
• Seizing
• Galling and Fretting corrosion

Features

• Reduces friction and wear - even when the base oil has already evaporated
• High pressure and high temperature resistance
• Ensures accurate assembly
• Enables easy disassembly of:
• Threaded parts
• gaskets and flanges - even after long operational periods
• Threaded parts remain in good condition and can be re-used
• Separating film ensures favourable release behaviour of the threaded connections
• Excellent sealing even in corrosive atmospheres
• Resistant to hot and cold water
• Lead-free and nickel-free
• Aerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellant
• Does not migrate - even when heated to 370°C

Applications

An effective anti-seize lubricant for:

• Bolts - nuts - pins
• Screw connections on hydraulic equipment
• Guides for brakes
• Bushings - fittings
• Brake adjusters
• Spark plugs
• Splines
• Wheel bolts
• Flanges - flange seals
• Pipeline connections
• Exhaust screw connections
• Linkages
• Sliding sleeves/shafts
• Press fits
• To absorb disk brake noise

Directions

The surfaces to be treated should be clean - dry and grease-free. Wire brush scaled parts and clean with an oil-free solvent like Amberklene FE10A thin even film should be applied either by spraying or by brushing Assembled parts (gear teeth - screws...) can slowly be put in motion. Avoid mixing with other products. Test before use on plastics or rubber. Do not use on energised equipment - oxygen systems or in presence of acetylene. Use aerosol only in ventilated areas.

TYPICAL PRODUCT DATA (without propellant)

• Appearance : Homogeneous - copper coloured
• Flash point (open cup) : < 0C
• Boiling range (solvent) : 60-95C
• Vapour density (vs. air=1) : 3
• Specific gravity @ 20C : 0.81
• Specific gravity @ 20C : 0.99
• Flash point (open cup) : >200C
• Dropping point : none
• NLGI consistency : 1 - 2
• Low temperature stability : -30C
• Temperature resistance *
• lubrication : 300C
• anti-seize : 1100C
• Hot water resistance (DIN 51807 T1 - 40C - 90C) : 1
• Corrosion (DIN 51802) : 0/0
• Four Ball Wear (DIN 51350 T5 - 1h - 500N) : 0.5 mm
• Packaging : 400 ml

* Grease decomposition temperature is 300C. Anti-seize properties of copper particles are conserved up to approximately 1100C.

Storage

The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.