LEAK DETECTOR is a unique water based formulation. It has been developed without the use of harmful solvents - silicones or oils to allow the safe and easy detection of all gas and air leaks.
Applications
Highlights all leaks even under low pressure and proves invaluable in the:
- Gas
- Plumbing
- Heating
- Automotive
- Offshore
- Engineering and Welding industries
Ideal for QC tests - maintenance and safety checks on:
- Pipework
- Joints
- Valves
- Couplings
- Air Lines
- Cylinders
- Air Brakes
- Regulators
- Screw Connections
- Exhaust
- Compressors
- Welding Seams
- Inflatable Equipment
The product remains stable and does not break down in use. Completely odourless and non-flammable. Leak Detector is quick and easy to use. It is suitable for use on compressed air and most industrial gases.
Features
- Stable foam formulation
- Meets the requirement of DIN 30657*
- Meets the requirements of BS EN 14291:2004
- DVGW registration number NG 5170 AS 0069*
- Can be used for almost all types of gases :
- natural gas - oxygen - compressed air
- propane - LPG - refrigerants
- butane - nitrogen
- acetylene - carbon dioxide
SPECIFICATIONS
Meets the requirements of MIL-L-25567* of oxygen compatibility. Testing of oxygen systems must be done carefully and product residues should not be allowed to build up.
- Non-staining - non-corrosive stable and safe
- Safe on:
- Plastics
- Steel
- Aluminium
- Copper and more
- Fitted with a 360° Spray System for all angle use - even upside down
- Water Based - Clean and safe in use
- Non-Flammable - Ensures safety in use
Directions
- Spray evenly over area to be tested
- Bubbles will appear at the precise location of the leak
- Product is water-based and should not come into contact with energised electrical equipment
- If necessary (e.g. for oxygen systems) product residues can be washed away with water
- Appearance : Clear - colourless liquid
- Odour : Odourless
- Specific Gravity (@20°C) : 1.00
- Flash Point : Not flammable
- Boiling Point : 100°C
- Freezing Point : 0°C
- pH : 8.5
- Surface Tension (@20°C) : 28mN/m
- Foam Stability (DIN 53902) : 90%
- Corrosion Test (DIN 30657) : Not corrosive
- Solubility : Soluble in water - insoluble in solvents
- Flammability : Non-Flammable
Storage
The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50°C- away from direct heat and naked flame.